Vloží karbidu wolframu, karbidu wolframu vložení
Wolframcarbid indsætter, wolframcarbid Indsæt
Wolfraamcarbide wordt ingevoegd, wolfraamcarbide invoegen
Tungsten carbide inserts, Tungsten carbide insert
Carbure de tungstène insère, insertion de carbure de tungstène
Hartmetall-Einsätzen, Wolframcarbid einfügen
Inserti in carburo di tungsteno, carburo di tungsteno inserto
Wolframkarbid setter inn, Sett inn Wolframkarbid
Insere carboneto de tungstênio, carboneto de tungsténio inserir
Inserează carbură de tungsten, carbură de Tungsten Inserare
Твердосплавные вставки, вставка из карбида вольфрама
Inserta de carburo de tungsteno, insertar de carburo de tungsteno
Infogar volframkarbid, volframkarbid infoga
Tungsten karbür ekler, Tungsten karbür Ekle
 
Position:Home>>Tungsten carbide inserts
Tungsten carbide inserts

Tungsten carbide inserts

Tungsten carbide mechanically clamped insert refers to a mechanical method of positioning, clamping blade. Mechanically clamped insert can be used for processing cylindrical clip, face, inner hole, and the advantage of using mechanically clamped insert is to avoid the defects caused by welding. The insert holders can be used multiple times, and the geometry design is flexible. Centralized sharpening is good for improving insert quality, convenient management, reducing costs and so on.

Milling Inserts Type 30
For making turning,boring and milling tools
Milling Inserts Type 311
For making end mills,three-edged mills & boring cutters
Milling Inserts Type 38
For making end mills,three-edged mills and boring cutters
Milling Inserts Type 40
For making turning,boring and face milling cutters
Milling Inserts Type 411
For making end face mills
Milling Inserts Type 48
For making turning,boring and face milling tools
Threading parting Inserts Type J1
For making mechanically clamped cut-off cutters,grooving cutters with side clearance and side relief
Threading parting Inserts Type J2
For making mechanically clamped cutoff tools and grooving tools
Threading parting Inserts Type M60
For making 60° threading tools
Indexable Inserts Type 3N
For making end mills with tool holder,drills with coolant channels,core drills
Indexable Inserts Type 3V
For making internal and external tools,threading tools and grooving tools
Indexable Inserts Type 3Y
For making 90°turning and boring tools suitable for heavy feed roughing
Indexable Inserts Type 4A
For making left & right hand,internal & external end face turning tools with offset shank
Indexable Inserts Type 4D
For making 75°,45°external and surface turning and boring tools with wide groove,suitable for heavy feed machining
Indexable Inserts Type 4F
For making left & right hand,internal & external turning tools with offset shank and small radial stress,suitable for machining thin and long shafts
Indexable Inserts Type 4G
For making cast iron turning tools
Indexable Inserts Type 4H
For making internal & external,end face and internal & external chamfered tools
Indexable Inserts Type 4N
For making drills with coolant channels,core drills and spiral corn milling cutters
Indexable Inserts Type 4V
For making left & right hand,internal & external turning and planing tools with offset shank
Indexable Inserts Type 3Y
For making 90°turning and boring tools suitable for heavy feed roughing
Indexable Inserts Type CH
For making 90°,75°turning and boring tools,suitable for roughing or semi-finishing of bearing and parts with holes due to long cutting edge and wide edge angle
Indexable Inserts Type CL
For making 90°turning,boring and milling tools with small radial force and good chip cut off effect
Indexable Inserts Type MH
For making 90°turning tools.Suitable for percussion and continuous cutting conditions
Indexable Inserts Type R
For making tools for ball bearing guides and profile tools with countersunk hole,easy clamping
Indexable Inserts Type T3F
For making left & right hand,internal & external end face turning tools and planing tools with offset shank
Indexable Inserts Type T3V
For making internal & external turning tools,boring tools,forming tools and planing tools
Indexable Inserts Type T3Y
For making 90°internal and boring tools,suitable for heavy feed roughing
Indexable Inserts Type ZL
For making mechanically clamped heavy-duty tools,suitable for large lathes or vertical lathes
Indexable Inserts Type 2C
For making turning and threading tools for CNC and profiles machines
Indexable Inserts Type 2V
For making turning tools for CNC and profiles machines,with double-sided groove and long cutting edge.
Indexable Inserts Type 3A
For making left & right hand,external turning tools and boring tools with offset shank.
Indexable Inserts Type 3C
For making left & right hand,external turning tools and boring tools with offset shank
Indexable Inserts Type 3D
For making left & right hand,external turning tools and boring tools with offset shank
Indexable Inserts Type 3F
For making left & right hand,internal & external turning tools with offset shank and small radial stress, particularly suitable for making thin and long shafts
Language: | český | danske | Nederlands | English | française | Deutsch | italiano | norske | português | român | русский | español | Švédsky | Türk
Email : ebiz@ctia.com.cn  
Copyright©2001 - 2011 CTIA E-biz Center All Rights Reserved