Karbid wolframu Rode, skončil nakonec mill prázdné, Rod PCB nástroje pro
Wolframcarbid rod, færdige slutningen mill tomme, Rod for PCB værktøj
Wolfraamcarbide staaf, afgewerkte einde molen spaties, Rod voor PCB tool
Tungsten carbide rod, Finished end mill blanks, Rod for PCB tool
Tige de carbure de tungstène, fini fin brutes de moulin, tige pour outil de PCB
Hartmetall-Stab, Finished End Mühle Leerzeichen, Rod für PCB-tool
Carburo di tungsteno verga, finito fine mulino Blank, Rod per strumento PCB
Wolframkarbid stang, ferdig slutten møllen tomme, Rod for PCB-verktøyet
Vareta de carboneto de tungsténio, acabado final moinho espaços em branco, Rod para ferramenta de PCB
Carbură de tungsten tijă, sfârşitul terminat moara necompletate, Rod pentru PCB unealtă
Карбид вольфрама стержня, готовые конец мельница заготовок, штанга для инструмента ПХД
Varilla de carburo de tungsteno, acabado final molino blanco, varilla para la herramienta de PCB
Volframkarbid rod, färdiga slutet mill tomma, Rod för PCB tool
Tungsten karbür çubuk, tamamlanan son değirmen boşluklar, çubuk için pcb aracı
 
Position:Home>>Tungsten carbide rods
Tungsten carbide rods

Tungsten carbide rods

Tungsten carbide rod applications include drill bits, end mills, and reamers. Custom diameters and length are also available in these grades as well as metric sizes. They are manufactured as standards with one, two, or three holes, straight or twisted to a 30 or 40 degree helix, or solid with no holes. All rods are available in standard lengths of 310 and 330 mm. Custom lengths available by request.

Sintered tungsten carbide rods
1, Diameter: 0.5-50.0mm
2, Length: 10-500mm
3, Density: 11.3-16.5 g/cm3
4, Composition: WC+Co, WC+TiC+Co, WC+TiC+TaC+Co
5, Surface: Sintering surface
6, Can be designed according to customer's requirements.
Finished tungsten carbide rods
1, Diameter: 0.5-50.0mm
2, Length: 10-500mm
3, Density: 11.3-16.5 g/cm3
4, Composition: WC+Co, WC+TiC+Co, WC+TiC+TaC+Co
5, Surface: Ground surface
6, Can be designed according to customer's requirements
Finished end mill blanks
Suitable for machining common steel, cast iron, stainless steel, heat-resistant steel, nickel based alloys and titanium alloys, etc. It is recommended for making conventional tools, such as twist drills, end mills, screw taps, gun drills, etc.
Rod for PCB tool
1, Density: 14.0-14.9 g/cm3
2, Composition: WC+Co, WC+TiC+TaC+Co
3, Surface: Sintering surface, Ground surface.
4, can be designed according to customer's requirements
Rods with one hole
1, Outside Diameter: 2.0-50.0mm, inside diameter: 0.3-10mm
2, standard length: 310mm, 330mm
3, Density: 14.0-14.9 g/cm3
4, Composition: WC+Co, WC+TiC+TaC+Co
5, Surface: Sintering surface, Forged surface, Ground surface
6, Can be designed according to customer's requirements.
Rods with two holes
1, Outside Diameter: 4.0-50.0mm, inside diameter: 0.3-10mm
2, standard length: 310mm, 330mm
3, Density: 14.0-14.9 g/cm3
4, Composition: WC+Co, WC+TiC+TaC+Co
5, Surface: Sintering surface, Forged surface, Ground surface
6, Can be designed according to customer's requirements
Rods with two helical holes

Features of tungsten carbide rods with two helical holes
1, Outside Diameter: 5.0-50.0mm, inside diameter: 0.5-10mm
2, standard length: 310mm, 330mm
3, Composition: WC+Co, WC+TiC+TaC+Co
4, Surface: Sintering surface, Forged surface, Ground surface
5, Can be designed according to customer's requirements.

Language: | český | danske | Nederlands | English | française | Deutsch | italiano | norske | português | român | русский | español | Švédsky | Türk
Email : ebiz@ctia.com.cn  
Copyright©2001 - 2011 CTIA E-biz Center All Rights Reserved