Doporučit známky a aplikace, kovadliny, tlakové lahve
Anbefale kvaliteter og programmer, Ambolte, pres cylindre
Rangen en toepassingen, aambeelden, druk cilinders aanbevelen
Recommend grades and applications, Anvils, pressure cylinders
Recommander des grades et des applications, enclumes, cylindres de pression
Empfehlen Sie Klasse und Anwendungen, Ambosse, Gasflaschen
Consigliamo di classi e applicazioni, incudini, cilindri di pressione
Anbefale karakterer og programmer, Anvils, press sylindere
Recomendo graus e aplicativos, bigornas, cilindros de pressão
Recomanda calități și aplicații, Anvils, cilindri sub presiune
Рекомендуем классов и приложений, наковальни, баллоны под давлением
Recomendamos grados y aplicaciones, yunques, cilindros de presión
Rekommendera kvaliteter och tillämpningar, städ, tryck cylindrar
Sınıflar ve uygulamaları, örsler, basınç silindirleri tavsiye
 
Anvils and pressure cylinders

Recommend grades and applications

Recommend grades and applications Recommend grades and applications Recommend grades and applications

Grade, properties and recommended applications of tungsten carbide anvils and pressure cylinders

Grade Density(g/cm3) hardness(HRA) T.R.S(N/mm2) Application
YL10.3 14.95 90.5 2300 Special grade for 2-facet anvils
YL20.3 14.75 90 3000 Universal grade for 6-facet anvils with a higher hardness and TRS and the TRS will increase by 30% after the products are sintered at a low pressure.
YL20.4 14.75 90 3200 Special grade for 6-facet anvils of a diameter over 160mm with a higher hardness and TRS and good resistance to thermal cracking.
YL30.3 14.41 88.5 3400 For manufacturing pressure cylinders of a class of 30-50kgs

YL20.4   New grade for 6-facet anvils

Big anvils manufactured with WC of support quality, a new technology for controlling carbon content and a compatible method for controlling the process of cemented carbide possess a higher hardness and transverse rupture strength and are well resistant thermal cracking. It is a special grade for 6-facet anvils of diameters over 160mm.

YL30.4   New grade for big pressure cylinders over 70kgs

It is for manufacturing big pressure cylinders for 2-facet anvils with cavities of (65-75)mm with high tensile strength and higher hardness and stability in its structure. Products of the new grade are in the process of research and development.

Note:All of above is the recommended specifications, and sintered and finish machined products of other specifications are available based on customers' drawings or samples.


Related Links

Tungsten Carbide Rod
Material Safety Data Sheet of Tungsten Carbide
Material Safety Data Sheet of Tungsten Carbide (PDF)
Catalog of Tungsten Carbide Anvils and Pressure Cylinders (PDF)

Language: | český | danske | Nederlands | English | française | Deutsch | italiano | norske | português | român | русский | español | Švédsky | Türk
Email : ebiz@ctia.com.cn  
Copyright©2001 - 2011 CTIA E-biz Center All Rights Reserved