Doporučit známky a aplikace, kovadliny, tlakové lahve
Anbefale kvaliteter og programmer, Ambolte, pres cylindre
Rangen en toepassingen, aambeelden, druk cilinders aanbevelen
Recommend grades and applications, Anvils, pressure cylinders
Recommander des grades et des applications, enclumes, cylindres de pression
Empfehlen Sie Klasse und Anwendungen, Ambosse, Gasflaschen
Consigliamo di classi e applicazioni, incudini, cilindri di pressione
Anbefale karakterer og programmer, Anvils, press sylindere
Recomendo graus e aplicativos, bigornas, cilindros de pressão
Recomanda calități și aplicații, Anvils, cilindri sub presiune
Рекомендуем классов и приложений, наковальни, баллоны под давлением
Recomendamos grados y aplicaciones, yunques, cilindros de presión
Rekommendera kvaliteter och tillämpningar, städ, tryck cylindrar
Sınıflar ve uygulamaları, örsler, basınç silindirleri tavsiye
 
Incudini e cilindri di pressione

Consigliamo di classi e applicazioni

Consigliamo di classi e applicazioni Consigliamo di classi e applicazioni Consigliamo di classi e applicazioni
Grade Density(g/cm3) hardness(HRA) T.R.S(N/mm2) Application
YL10.3 14.95 90.5 2300 Special grade for 2-facet anvils
YL20.3 14.75 90 3000 Universal grade for 6-facet anvils with a higher hardness and TRS and the TRS will increase by 30% after the products are sintered at a low pressure.
YL20.4 14.75 90 3200 Special grade for 6-facet anvils of a diameter over 160mm with a higher hardness and TRS and good resistance to thermal cracking.
YL30.3 14.41 88.5 3400 For manufacturing pressure cylinders of a class of 30-50kgs
Language: | český | danske | Nederlands | English | française | Deutsch | italiano | norske | português | român | русский | español | Švédsky | Türk
Email : ebiz@ctia.com.cn  
Copyright©2001 - 2011 CTIA E-biz Center All Rights Reserved