Carbide plates for mould

1, Length: 10.0-500mm, Width: 10.0-500 mm
2, High: 1.0-100.0 mm
3, Surface: Sintering surface, Ground surface
4, Composition: WC+Co, WC+TiC+TaC+Co
5, Can be designed according to customer's requirements.

Tungsten carbide plates are used for cutting metals, woods and other materials. The advantages of our carbide plates are smooth cutting, fast cutting speed and have a long service time. Unlimited ranges of grades and sizes of carbide plates are available in our company.

Grade, properties and recommended applications for Carbide plates for mould

Grade	Density(g/cm3)	hardness(HRA)	T.R.S(N/mm2)
YG11	14.45	88.0	2400
YG15	14.05	87.1	2700
YG20	13.55	85.0	2800
YL10.2	14.45	91.5 (1600 HV3)	2400
YFD35	14.30	92.5 (1750 HV3)	3200
YFD25	14.49	93.0 (1850 HV3)	3000
MZ30	14.15	89.7	3200
MZ50	13.40	86.2	3000


YFD25,YFD35	MZ30,YL10.2	MZ30
YG11,YG15	YG15	MZ50
MZ30,YL10.2	MZ30,YG11	YG615,YG20



YG11	G5	GC30/H50S	K92	D60/G55	RD60	KG5	GB20
YG15	TB6	B40S	K3109	G65	EA50	KG6	GB30
MZ50/YG20	TB7		K91	G70/C70	EA60	ST7
YL10.2	KD10	TSM30	KF310	D40	FD15	WF15	HB40F
YFD35	EF10	MG18	KR855	F10	FD25	WF10	HB30F
YFD25	EF05	TSM20		F08			HB20F
MZ30	KD20/WD20	H40S/MG30	K94/K3833	D50	RD30/RD50	KG4/KG7	GB15

The specifications and tolerance of tungsten carbide plate

Specification(mm)	Tolerance (mm)
	Blank			Coiningcompact
	High	Width	Lengh	Coiningcompact
(1.0-70)x100x100	+0.5	-/+2.2	-/+2.2	-/+0.01
(1.0-70)x105x105	+0.5	-/+2.2	-/+2.2	-/+0.01
(5.0-70)x150x150	+0.5	-/+2.2	-/+2.2	-/+0.01
(5.0-70)x200x200	+0.5	-/+2.2	-/+2.2	-/+0.01

Note:Other grades and specifications can be designed according to customer's requirements.

Carbide plates for mould