Řezačky disk karbidu wolframu, karbidu wolframu disk ořezávání, disk ořezávání
Wolframcarbid disc fræsere, wolframcarbid disc Ilder, disc afklipper
Wolfraamcarbide schijf cutters, wolfraamcarbide schijf cutter, disc cutter
Tungsten carbide disc cutters, Tungsten carbide disc cutter, disc cutter
Tailleurs de disque de carbure de tungstène, coupeur de disque de carbure de tungstène, coupeur de disque
Hartmetall-Scheibe-Schneidgeräte, Hartmetall-Scheibe-Messer, Scheibe-Messer
Frese a disco in carburo di tungsteno, carburo di tungsteno disco cutter, fresa a disco
Wolframkarbid platen cutters, Wolframkarbid plate kutter, platen kutter
Cortadores de disco de carboneto de tungsténio, cortador de disco de carboneto de tungsténio, cortador de disco
Tăietori discul carbură de tungsten, carbură de Tungsten discul tăiat, discul de tăiat
Фрезы дисковые из карбида вольфрама, карбида вольфрама дисковые фрезы, дисковые фрезы
Cortadoras de disco de carburo de tungsteno, corte de disco de carburo de tungsteno, corte de disco
Volframkarbid skiva saxar, volframkarbid skiva kutter, skiva skärare
Tungsten karbür disk kesiciler, Tungsten karbür disk kesici, disk kesici
 
Обычай сделал серии

Фрезы дисковые карбида вольфрама

Фрезы дисковые карбида вольфрама Фрезы дисковые карбида вольфрама Фрезы дисковые карбида вольфрама
Specification O.D.(mm) I.D.(mm) Thickness(mm)
Φ11 x Φ5 x 4.3 11 5 4.3
Φ14 x Φ5 x 3.5 14 5 3.5
Φ14 x Φ7.5 x 3.5 14 7.5 3.5
Φ14 x Φ7.5 x 5 14 7.5 5
Φ15.5 x Φ7.8 x 0.8 15.5 7.8 0.8
Φ15.5 x Φ7.8 x 1.0 15.5 7.8 1.0
Φ15 x Φ5.5 x 3.5 15 5.5 3.5
Φ16.5 x Φ6.5 x 5 16.5 6.5 5
Φ17 x Φ5.2 x 1.0 17 5.2 1.0
Φ17 x Φ5.2 x 1.2 17 5.2 1.2
O.D.(mm) Tolerances of O.D.(mm) I.D.(mm) Tolerances of I.D.(mm)
<30 0~+0.5 -0.5~0 -0.1~+0.1
30 -1.5~+0.5 -0.5~+0.5 -0.1~+0.2
120 -1.5~+1.0 -1.0~+0.5 -0.2~+0.2
200 -1.5~+2.0 -1.5~+0.5 -0.3~+0.3
O.D.<250 -2.0~+5.0 -3.0~+1.0 -0.5~+0.5
Grade Density(g/cm3) hardness(HRA) T.R.S(N/mm2) Application
YS2T 14.45 91.5 2380 An ultra fine cemented carbide with tungsten powder and binder cobalt. Good toughness and wear resistance, suitable for low speed cutting allowing a big rake angle, ensuring the sharpness of the edges, bearing a heavy cutting force and achieving good surface finish.
YL10.2 14.45 91.5 2880 With good transversal rupture strength and wear resistance, it is suitable for low-speed rough turning and milling of heat resistant alloys, titanium alloys and of plastics glass as well.
Language: | český | danske | Nederlands | English | française | Deutsch | italiano | norske | português | român | русский | español | Švédsky | Türk
Email : ebiz@ctia.com.cn  
Copyright©2001 - 2011 CTIA E-biz Center All Rights Reserved