Position:Home>>Hartmetall-Walze
Email:ebiz@ctia.com.cn
Related Links
Hartmetall-Walze
Wolframcarbid Rollen Ring-Datenblatt
Hartmetall-Roll-Ring ist eine Art von Werkzeug-Material besteht aus Hartmetall und Kobalt durch hohe H?rte und Verschlei?festigkeit. Um hohe Verschlei?festigkeit, lange Lebensdauer und hohe Effizienz der Zementkarbid Roll Ringe bei der high-Speed-parallelen nutzen, sollte wie folgt geachtet werden beim Kauf und zur Verwendung von Zementkarbid Ring Würfeln.
Tabelle der Typen und Eigenschaften von Hartmetall Rollen Ring und verwandte Daten
| Grade | Chemical composition | Mechanical properties | Physical properties | |||||
|---|---|---|---|---|---|---|---|---|
| Co+Ni % |
WC % |
Hardness HAR |
T.R.S MPa |
Compressive Strength MPa |
Young's modulus of elasticity KN/mm2 |
Density g/cm3 |
Thermal conductivity | |
| YGH20 | 10 | 90 | >86.0 | >2500 | 3500 | 560 | 14.2~14.5 | 0.2 |
| YGH25 | 12 | 88 | >84.0 | >2300 | 3400 | 550 | 14.0~14.3 | 0.21 |
| YGH30 | 15 | 85 | >83.5 | >2520 | 3300 | 540 | 13.8~14.2 | 0.2 |
| YGH40 | 18 | 82 | >83.0 | >2570 | 3200 | 500 | 13.4~14.2 | 0.19 |
| YGH45 | 20 | 80 | >82.0 | >2570 | 3100 | 480 | 13.3~13.9 | 0.18 |
| YGH55 | 26 | 74 | >81.0 | >2570 | 3000 | 450 | 12.6~13.2 | 0.17 |
| YGR20 | 10 | 90 | >85.0 | >2400 | 3400 | 550 | 14.2~14.8 | 0.2 |
| YGR25 | 12.5 | 87.5 | >83.0 | >2270 | 3300 | 540 | 14.0~14.3 | 0.22 |
| YGR30 | 15 | 85 | >83.0 | >2360 | 3200 | 530 | 13.8~14.3 | 0.2 |
| YGR40 | 18 | 82 | >82.0 | >2400 | 3200 | 530 | 13.5~13.9 | 0.2 |
| YGR45 | 20 | 80 | >80.5 | >2250 | 3000 | 480 | 13.4~13.9 | 0.18 |
| YGR55 | 25 | 75 | >79.0 | >2400 | 2800 | 420 | 12.9~13.4 | 0.17 |
| YGR60 | 30 | 70 | >78.0 | >2200 | 2600 | 300 | 12.6~13.1 | 0.16 |
Empfohlene Anwendungen der Klasse für Hartmetall roll Ringe
| Grade | Recommended applications |
|---|---|
| YGH20 | Maximum hardness, excellent wears resistance in the series. Used in the last 1-2 stands of good high speed finishing mills for rolling common and hard steel bars. |
| YGH25 | Higher wear resistance, moderate impact resistance in the series. Used in the last 1-3 stands of good high speed finishing mills for rolling common and hard steel bars. |
| YGH30 | Moderate wear resistance and impact resistance, good for general purposes. Used in the last 1-4 stands or all stands of finishing mills. |
| YGH40 | Best for general purposes, used in the front stands of good mills and in the rear stands of common mills. |
| YGH45 | Used in the first and second stands of finishing mills and in the stands of pre-finishing rolling mills. For every stand of rolling lines for low speed rolling, low precision and unstable operation. |
| YGH55 | Maximum binder content in YGH series, good toughness and thermal crack resistance. Used in the stands of pre-finishing rolling mills and for roll rings for hot rolling of ribbed steel. |
Related Links
Tungsten Carbide Rod
Material Safety Data Sheet of Tungsten Carbide
Material Safety Data Sheet of Tungsten Carbide (PDF)
Catalog of Tungsten Carbide Roller (PDF)