Karbid wolframu YT série, třídy karbidu wolframu, karbidu wolframu třídu
Wolframcarbid YT serie, wolframcarbid kvaliteter, wolframcarbid lønklasse
Wolfraamcarbide YT serie, wolfraamcarbide rangen, wolfraamcarbide rang
Tungsten carbide YT series, Tungsten carbide grades, Tungsten carbide grade
Série de carbure de tungstène YT, grades de carbure de tungstène, grade de carbure de tungstène
Wolframcarbid YT Serie, Hartmetall-Klasse, Hartmetall-Klasse
Serie di carburo di tungsteno YT, classi di carburo di tungsteno, grado di carburo di tungsteno
Wolframkarbid YT serien, Wolframkarbid karakterer, Wolframkarbid-klasse
Série de carboneto de tungsténio YT, qualidades de carboneto de tungstênio, carboneto de tungsténio grau
Seria carbură de tungsten YT, carbură de Tungsten calități, carbură de Tungsten grad
Карбид вольфрама YT серии, классы из карбида вольфрама, класс из карбида вольфрама
Serie de carburo de tungsteno YT, grados de carburo de tungsteno, grado de carburo de tungsteno
Volframkarbid YT serie, volframkarbid kvaliteter, volframkarbid klass
Tungsten karbür yt serisi, Tungsten karbür sınıflarda, Tungsten karbür sınıf
 
Wolfraamcarbide rangen

Wolfraamcarbide YT serie

Wolfraamcarbide YT serie Wolfraamcarbide YT serie Wolfraamcarbide YT serie

Grade

Typical property values

Performance {~} Applications

Equivalent to ISO

Density
g/cm3

Bending
Strength
N/mm2

Hardness
HRA

YG3X

15.2

1600

92.5

Best wear resistance among W-Co alloys yet impact toughness comparatively low, High speed finishing of small chip section of cast irons, non-ferrous metals {~} alloys quenched steel and alloy steel.

K01

YG3

15.2

1750

92.0

Wear resistance less than YG3X only, sensitive to impact and vibration for continuous semi-finish and finish turning of castiron, non-ferrous metals and their alloys and for finish turning of threads and reaming.

K05

YG6A

14.9

1850

92.0

Fine-grained alloy, good; wear resistance. Semi-finishing of chilled cast iron, non-ferrous metals/alloys; semi-finishing and finishing of hardened steel, alloy steel.

K10

YG6X

14.9

1890

91.5

Fine grain WC alloy, wear resistance higher than YG6, strength in use close to YG6, Machining of chilled alloy cast irons and refractory alloy steel or finishing of ordinary cast irons.

K10

YG6

14.9

2050

90.5

High wear resistance ,yet lower than YG3 impact and shock resistance higher than YG3X Semi-finishing and finishing of cast irons ,nonferrous metals {~} alloys and non metallic materials at medium cutting speed.

K15~K20

YG8

14.7

2520

90.0

High strength in use, impact and shock resistance higher than YG6, but wear resistance and cutting speed comparatively lower. Roughing of cast irons non ferrous metals and their alloys as well as nonmetallic? materials at low cutting speed

K30

YG600

14.9

1550

93.5

High red hardness, wear resistance and thermal strength under high temperature. Machining of cast irons. quenched steel. non-ferrous metals and non-metallic materials

K01~K05

YG610

14.6

1720

93.0

Good thermal strength and high wear resistance .Continuous or intermittent? cutting of cast irons, refractory alloys and quenched steel?

K01~K10

YG643

13.7

1800

92.5

High wear resistance, high resistance to oxidation and to bonding Machining of cast irons, refectory alloys, stainless steel, quenched steel and non-ferrous materials

K05~K10/M10

YG813

14.4

2100

91.5

Optimum wear resistance, high bending strength and high resistance to bonding . Machining of refractory alloys, stainless steel and high manganese steel, etc.

K10~K20/M20

YG640

13.2

2410

91.0

Good thermal strength, high resistance to wear, impact and oxidation. Continuous or intermittent cutting of heavy work pieces of cast irons, milling and planning of refractory steel with high strength.

K30~K40/M40

YG522

14.3

1850

92.5

High wear resistance, high strength and higher service endurance than the same tool fabricated by Taiwan, esp. for bamboo and wood processing, and for cutting of non-ferrous metals and non-metallic materials.

K05~K20

YG524

14.6

2400

91.0

High strength alloy with high toughness and impact resistance, for milling and planning of large bamboo and wood surfaces.

K20~K30

YG532

14.1

1960

92.0

High hardness and toughness. Machining of cast irons. stainless steel, and refractory alloys. etc.

K10~K20/M20

YG546

14.6

2150

90.0

Good toughness, high strength, capable of resisting high impact load, Roughing of stainless steel and cast irons.

K30~K40

Language: | český | danske | Nederlands | English | française | Deutsch | italiano | norske | português | român | русский | español | Švédsky | Türk
Email : ebiz@ctia.com.cn  
Copyright©2001 - 2011 CTIA E-biz Center All Rights Reserved